New maintenance knowledge of Yunnan light partition board :
1. Yunnan lightweight wallboards must be properly stacked. No matter what kind of wallboard product, it is often in the initial setting state of the slurry after demolding. At this time, the board body has a certain strength, but there is still a lot of distance from the use strength. Therefore, the wallboard code must be placed on In a flat place, the plate body will easily deform and affect the flatness. Stacking generally adopts the way of stacking. According to different products, each stack can be stacked to 2-3 meters in height. For the convenience of future shipments, pallets must be placed in advance at the bottom of the stack. The quality of the pallets and the flatness of the pallets must be ensured to avoid bending of lightweight wall panels due to uneven force.
2. The environment in which Yunnan light-weight partition boards are stored should be suitable. Light-weight wall boards undergo a period of curing after production, and the curing period is generally not less than 20 days. During the curing phase, there are certain requirements for the temperature and humidity of the storage environment and cannot be stored at will. For example, if the temperature of the storage environment is too low, it is difficult for cement and other slurry to reach the qualified strength, resulting in a decrease in the strength of the entire wall panel; if placed under the hot sun, the hardening speed of both sides of the lightweight wall panel will be inconsistent, causing the panel The surface is curved; in the rainy season and areas with excessive humidity, the maintenance period should be appropriately extended to allow the lightweight partition wall to have sufficient drying time and so on.