网上棋牌游戏

Welcome to the official website of Kunming Lightweight Wall Panel!

13648895961

云南轻质隔墙板

categories of news
News

contact us
Contact

Company Name: Kunming Chaoju Building Material Co., Ltd.

Contact: Manager Xu

Phone: 13648895961

Mobile: 15334399949

Email: 1151967773@qq.com

Fax: 13648895961

hq2016.cn Website: hq2016.cn

Address: Guanyin Temple Village, Toudian Community, Qidian Street, Yangzonghai Scenic Spot, Kunming , Yunnan



Your current location : Home >> News
  • Can lightweight partition boards be reused?

    Lightweight partition wall panel is a new type of energy-saving and environmentally friendly wall panel material. The lightweight wall panel has male and female card slots. During the installation process, it is only necessary to erect the male and female card slots and then apply a small amount of sand and gray to splicing. The operation is very convenient. So, can lightweight partition boards be reused? Below, the manufacturers of light-weight partition boards in Yunnan will take a look with everyone. Lightweight partition board can
    Release time: 2019-12-23 Clicks: 67

  • New maintenance knowledge of light-weight partition boards in Yunnan

    New knowledge of Yunnan light-weight partition wall boards: 1. Yunnan light-weight wall boards must be properly stacked. No matter what kind of wallboard product, it is often in the initial setting state of the slurry after demolding. At this time, the board body has a certain strength, but there is still a lot of distance from the use strength. In a flat place, the plate body will easily deform and affect the flatness. Put one
    Release time: 2019-12-17 Clicks: 76

  • There are several types of lightweight partition boards?

    There are several types of lightweight partition boards? Let ’s take a look at Xiaobian, a light-weight partition board in Yunnan! First, block type partition wall. Non-load-bearing partition walls built with various lightweight wall blocks. This partition material is mostly used in the interior planning of rough houses. Its characteristics are stability, sound insulation and thermal insulation, but once it is built into a wall, it cannot be disassembled and adjusted. Second, the glass partition wall. This glass partition is used
    Release time: 2019-12-13 Clicks: 42

  • ALC Lightweight Wall Panel Appearance Defect Limitation and Appearance Quality Requirements

    ALC lightweight partition wall appearance defect limitation and appearance quality requirements, let ’s follow the editor of Yunnan lightweight partition wall. 1. No cracks on the large surface parallel to the width of the plate (transverse cracks) are allowed. There is no appearance quality requirement. mm, the quantity is not more than 3
    Release time: 2019-12-09 Clicks: 45

  • How to choose a lightweight partition board at the right price

    As a new material, lightweight partitions have now occupied an important position in the wall panel market. Whether it is interior decoration or the interior design of malls and hotels, everyone will choose lightweight partitions when installing wall panels. When buying lightweight partition boards, everyone cares about the price of lightweight partition boards. The price of lightweight partition board is between 100-200 per square
    Release time: 2019-12-06 Clicks: 49

  • Yunnan light partition board manufacturer

    Kunming Chaoju Building Material Co., Ltd. was established in June 2012 with a registered capital of 500,000 yuan. It is a professional manufacturer of light wall panels, R & D, production, sales, and light wall panel machinery and technology. Transferred professional building materials company. Main business products: lightweight wall panels, GRC lightweight partition boards, energy consumption is about 40% lower than domestic counterparts, and more energy efficient
    Release time: 2019-12-02 Clicks: 42

  • Storage requirements and construction technology of gypsum blocks

    Gypsum blocks have many requirements in terms of preservation, so if you don't pay any attention to them, you may cause damage to the blocks. Therefore, we need to pay attention to many issues when storing and handling. At the same time, in terms of construction, we need to follow certain procedures, so that we can do the construction of gypsum blocks more conveniently. Let Yunnan be lightweight
    Release time: 2019-11-29 Clicks: 37

  • What is the fire rating of lightweight fireproof partition wall panels?

    The fireproof grade of lightweight fireproof partition wall board is A level, which is a national standard. Since the two sides of the panel are calcium silicate boards, the fire resistance is more prominent. There are many manufacturers of lightweight fireproof partitionboards that can meet the needs of a large number of customers The requirements of the goods, the thickness of the board from 90-150mm are available in stock, the length of 2440 * 610mm, now a large number of decoration companies, construction companies
    Release time: 2019-11-25 Clicks: 28

  • What are the specifications of eps lightweight partition board?

    eps lightweight partition wall specifications are complete, manufacturers can produce according to customer needs, the current conventional size is 2440 mm long, 610 mm wide, thickness 75mm, 90mm, 100mm, 120mm, 150mm, can also cut, wear Nails, punches, etc. At present, it is mostly used for the construction of steel structures and warehouses.
    Release time: 2019-11-22 Clicks: 38

  • GRC lightweight partition board ceramsite foam lightweight cement fiber composition material

    The new glass partition decoration materials are a new generation of building materials based on traditional building materials. They mainly include new wall materials, heat insulation materials, waterproof sealing materials and decoration materials. I. Glass partitions Glass partitions have good lighting performance and sound insulation. The decorative space is beautiful and generous. As a partition wall material, it divides the space without obstructing the view. It is quite good.
    Release time: 2019-11-18 Clicks: 45

  • Design requirements for lightweight partition boards

    What are the design requirements for lightweight partition boards? Let ’s take a look at the lightweight partition boards in Yunnan, which is the same flexible connection between the autoclaved aerated concrete slab and the main structure. It is conducive to adapting to the interlayer deformation of the main structure under the action of earthquake or wind load, mitigating earthquake damage, and better adapting to different terrains and different designs. Fully do
    Release time: 2019-11-15 Clicks: 28

  • Lightweight partition wall construction process explanation

    The construction process of lightweight partition boards is something everyone wants to know. I ’ll give you some insights on the construction of lightweight partition boards in Yunnan. Second, the construction process 1. Clean up the protruding parts on the base surface (wall, top, ground) Mortar, concrete and sundries, leveling treatment. First pop the position line of the light board installation on the ground to arrange the board. 2. According to the row board installation diagram, after the first board is installed
    Release time: 2019-11-11 Clicks: 27

Total 208 items 12 Articles per page Pages: 1/18
2 3 4 5 6 7 8 9 10 下一页 尾页 1 2 3 4 5 6 7 8 9 10 Next Last

 轻质隔墙板厂家

contact us

邮编: 65000电话: 15334399949 Address: Guanyin Temple Village , Toudian Community, Qidian Street, Yangzonghai Scenic Spot, Kunming , Yunnan, China Post Code: 65000 Tel: 15334399949

2018 Kunming Chaoju Building Material Co., Ltd. | All rights reserved Record number: Yunnan ICP No. 17005751 Technical support: Leba Technology


昆明 大理 丽江 保山 西双版纳 香格里拉 澄江 文山 曲靖 Hot Products | Main Area: Kunming, Dali, Lijiang, Baoshan, Shanxi, Shuangbanna, Shangri-La, Chengjiang, Wenshan, Qujing

 轻质隔墙板厂家